Product Support

Dreo Cruiser Pro T2 Tower Fan

Dreo Cruiser Pro T2 Tower Fan

Models: DR-HTF002, DR-HTF002S

Wave goodbye to the hot weather. Enjoy quick and wide-ranging cooling wherever you stay in the room.

How to use

Dreo Cruiser Pro | How to Connect your Tower Fan to WIFI


Please check if the indicator of the display is on, ensure that the voltage and frequency is the same as required in the user manual (US: 120V 60Hz) or test with another socket.

Then make sure if the power button on the control panel is abnormal by turning it on via the remote control.

Please re-plug the power adapter.

Then press the power button/remote control to power on.

We recommend you check the air inlet/outlet and see if there are any obstacles and abnormal deformations.

Launch Dreo and sign in or create an account by following in-app instructions. (Verify your email address to continue)

Once you log in, tap ADD Device on the app. (Make sure to enable Bluetooth on your mobile device and plug in the Dreo appliance).

Select the Dreo appliance you want to link.

Hold the Tower Fan Oscillation button for 5 seconds to start network settings and device pairing. The WiFi icon will keep flashing when pairing.

Select your WiFi, enter your password, and tap Next to connect to the network. The WiFi icon will keep flashing when pairing.

You are now ready to control the appliance on your app. Start by giving your Tower Fan a new name! Hold the oscillation button again for 5 seconds to restart the network setup.

Please check that your WiFi is stable.

Please disconnect the WiFi with your tower fan to restart the network setup.

Please switch the fan speed to a higher one.

Then switch to normal mode.

We recommend you clean the inlet grills and test the tower fan again.

The noise level is about 35dB at the lowest speed. The higher the gear setting of the tower fan, the louder the noise will be. We recommend turning down the fan speed to see if the noise decreases. Otherwise, please try the following steps.

If you can, please take a short video and send it to as soon as possible.

Please relocate the fan.

Then try to apply lubricant to the base if the noise only happens while the fan rotates.

After power on, choose the normal mode, press and hold the mode button for 3-5 seconds. Should mute the prompt sound.

ually, fan speed decreases every 30 minutes. Speed decreases by two levels at most and will remain constant if at level 1. The sound of the prompt will automatically turn off.

ease test with the remote control.

If you can, please take a short video and send it to as soon as possible.

Please test by controlling the tower fan via the control panel.

Then replace the battery in the remote as instructed in the User Manual.

Note: Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.

Check whether the floor is flat.

Check whether the base of the tower fan is well-placed. Foreign objects may affect stability.

Please make sure if it is due to that the timer is on.

If you can, please take a short video and send it to as soon as possible.

You can turn the screen off by switching the style to sleep mode. It will automatically turn off within 5 seconds.

Please check if there is an OSC icon in the lower right corner of the screen to make sure if the OSC function is on.

Then check if the fan body is stuck or entangled by the cable.

Still Need Help?

We're happy to assist you whenever you need us.

Submit a Support Request


DR-HTF002 User Manual



Dreo Home

Dreo Home is designed to provide everything you need in one place.

Get the APP by Scan

Dreo Home

Requires iOS 13.0 or above.

Dreo Home

Requires Android 5.0 or above.