Heater 316
1. How do I use the discount code?
Copy the discount code from the product page,and then apply the discount code during your checkout.
2. Can I redeem multiple discount codes?
No, discount codes cannot be combined. Only one code can be applied per order.
3. Why is my discount code invalid?
* The code does not apply to the items in your cart.
* The code was entered incorrectly.
* The code has expired.
* The code is not from DREO's official website.
* Your cart already has an active discount code, and multiple codes cannot be used together.
If you have any questions,please feel free to reach out to our customer service team support@dreo.com
Color:
Translation missing: en.product.general.option_selection_instructions
Why Buy at the DREO Stores
Fast, Free Shipping
30-Day Money-back Guarantee
Hassle-Free Warranty
Earn Points, Redeem Cash Discounts
Payment Methods
Heater 316
Sale price$39.99 USD
Regular price (/)
Color:
Translation missing: en.product.general.option_selection_instructions
Specifications
Special Features: Adjustable Temperature, Child Lock, Flame Resistant, Overheat Protection, Remote Control, Tip-Over Protection
Power Source: Corded Electric
Heating Coverage: 200 sq.ft
Heat Output: 1500 Watts
Number of Speeds: 4
Voltage: 120Volts
Min Temperature Setting: 41 Degrees Fahrenheit
Max Temperature Setting: 95 Degrees Fahrenheit
What's in the box
1x DREO Heater 316
1x User Manual
1x Quick Start Guide
Frequently Asked Questions
Our customer support is available Monday to Friday: 8am-8:30pm.Average answer time: 24h
Cleaning and Maintenance
It is recommended that the heater be cleaned at least one time during the operating season and before off-season storage in order to provide the optimum level of performance
Always disconnect the appliance from the mains by switching it off and removing the plug from the power outlet before cleaning
• Turn the heater OFF, unplug it and wait for the heater to cool down
• Use only a soft cloth to gently wipe the outer surfaces of the heater clean
• Do not use any cleaning agents or detergents
• Never immerse the heater in water and never allow water to drip into the motor housing. Be sure not to wet the Heating Element and the switches
• Do not allow water to run into the interior of the heater as this could result in a fire or electric shock hazard
• For storage, you may leave the heater covered to protect it from dust. Store it in a cool, dry location and arrange the cable away from traffic areas so that it will not be tripped over or damaged
Always disconnect the appliance from the mains by switching it off and removing the plug from the power outlet before cleaning
• Turn the heater OFF, unplug it and wait for the heater to cool down
• Use only a soft cloth to gently wipe the outer surfaces of the heater clean
• Do not use any cleaning agents or detergents
• Never immerse the heater in water and never allow water to drip into the motor housing. Be sure not to wet the Heating Element and the switches
• Do not allow water to run into the interior of the heater as this could result in a fire or electric shock hazard
• For storage, you may leave the heater covered to protect it from dust. Store it in a cool, dry location and arrange the cable away from traffic areas so that it will not be tripped over or damaged
Why is there no air coming out?
1. Re-plug the power cord or test it with another socket
2. Press the power button/remote control to power on
3. Check the air inlet/outlet and see if there is any obstacles and abnormal deformations.
2. Press the power button/remote control to power on
3. Check the air inlet/outlet and see if there is any obstacles and abnormal deformations.
Why is my heater not turning on?
1. Ensure that the voltage and frequency is the same as required in the user manual
2. Check if the power button on the control panel is abnormal by turning it on/off via the remote control
3. Check whether the LED light on the panel is on when plugged in
4. Take a short video
2. Check if the power button on the control panel is abnormal by turning it on/off via the remote control
3. Check whether the LED light on the panel is on when plugged in
4. Take a short video
Why does the fan heat up so slowly?
1. Switch the unit to HI mode
2. Switch to normal mode
3. Clean the air inlet/outlet
2. Switch to normal mode
3. Clean the air inlet/outlet
Why is my heater not warm enough?
1. Switch the unit to HI mode
2. Switch to normal mode
3. Check if ambient temperature or room temperature is too low. Test the unit in a different room.
2. Switch to normal mode
3. Check if ambient temperature or room temperature is too low. Test the unit in a different room.
Why is my heater generating so much noise?
The higher the gear setting of the space heater, the louder the noise will be. We recommend turning down the unit speed to see if the noise will be reduced. Please also try the following steps
1. Take a short video for us to confirm if it is abnormal
2. Relocate the unit and ensure the heater is on a stable, secure surface
3. Try to apply lubricant to the base if the noise only happens while the heater rotates
1. Take a short video for us to confirm if it is abnormal
2. Relocate the unit and ensure the heater is on a stable, secure surface
3. Try to apply lubricant to the base if the noise only happens while the heater rotates
Why is my LED screen blinking?
1. Ensure that the voltage and frequency is the same as required in the user manual
2. Take a short video
2. Take a short video
Why are the buttons on the control panel not working? Why is my remote not working?
Control panel
1. Test with the remote control
2. Take a short video of this issue
Remote
1. Test by controlling the space heater via the control panel
2. Replace the battery in the remote as instructions in the User Manual
Note: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
1. Test with the remote control
2. Take a short video of this issue
Remote
1. Test by controlling the space heater via the control panel
2. Replace the battery in the remote as instructions in the User Manual
Note: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
Why does my heater shut off randomly?
1. Check if it is due to that the timer is on
2. When the set temperature is reached, the heater will stop working, and come back on when ambient temperature is lower than the set temperature
3. When the ambient temperature is above 50°C / 122°F, the heater will stop heating and the overheat alarm will be triggered with malfunction code FF on LED display and beeps. Please unplug it from the power source and power it on again when the ambient temperature drops below 50°C / 122°F
2. When the set temperature is reached, the heater will stop working, and come back on when ambient temperature is lower than the set temperature
3. When the ambient temperature is above 50°C / 122°F, the heater will stop heating and the overheat alarm will be triggered with malfunction code FF on LED display and beeps. Please unplug it from the power source and power it on again when the ambient temperature drops below 50°C / 122°F
Why is the OSC function not working?
1. Make sure the Oscillation Function has been activated.
2. Relocate the unit and make sure the heater is on a stable, secure surface.
Note: If there is cracking sound when oscillating, please try to apply lubricant to the base if possible.
2. Relocate the unit and make sure the heater is on a stable, secure surface.
Note: If there is cracking sound when oscillating, please try to apply lubricant to the base if possible.
Why is the appliance so hot?
1. It is normal that the surface of the heater will become hot during use. Normally, it is below 55°C.
2. For Radiator Heater, the surface of the heater may reach 80°C maximum
Please unplug the power cord and wait the unit to cool down, then restart it
2. For Radiator Heater, the surface of the heater may reach 80°C maximum
Please unplug the power cord and wait the unit to cool down, then restart it
There is odor coming out of the heater, what can I do?
For brand new machines, there will be a slight odor. It is recommended that customers use it with ventilation for the first few uses to dissipate the odor
What can I do if the heater is tripping during use?
1. The power exceeds the home circuit load. Please unplug other high power appliances and try again
2. If it is tripping due to product short circuit, replacement should be arranged
2. If it is tripping due to product short circuit, replacement should be arranged
What does E1 code mean?
Temperature sensor open circuit
What does E2 code mean?
Temperature sensor short circuit
Take a short video to confirm and replace it
Take a short video to confirm and replace it
Our customer support is available Monday to Friday: 8am-8:30pm.Average answer time: 24h
Customer Reviews
This product is rated 0 of stars.
It has received 109 reviews.
You may also like
