Please re-plug the power adapter. Then press the power button/remote control.
We recommend you check the air inlet/outlet and see if there are any obstacles and abnormal deformations.

Please switch the fan speed to a higher one.
Then switch to normal mode.
We recommend you clean the inlet grills and test the tower fan again.

After power on, choose the normal mode, press and hold the mode button for 3-5 seconds. Should mute the prompt sound.

Usually, fan speed decreases every 30 minutes. Speed decreases by two levels at most and will remain constant if at level 1. The sound of the prompt will automatically turn off.

Please test by controlling the tower fan via the control panel.
Then replace the battery in the remote as instructed in the User Manual.
Note: Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.

Some DREO products include a California Proposition 65 (P65) warning label, which is commonly found on electrical products sold in California. This is because certain components, like power cord plugs, may contain trace amounts of substances such as lead, as required by state law. We recommend avoiding direct contact with metal plugs when possible.
The presence of this label is normal and does not mean the product is unsafe. All DREO products comply with safety standards and are safe to use as intended.If you have any questions, feel free to contact our support team.